Step-by-Step Guide to the House Lifting Process

House lifting can be a life changer in case of having a house that is constructed in a low-lying terrain that is always being flooded, or the foundation is being affected. Rather than knocking down your current home and having to build a new one, house lifting lifts your entire home securely higher than it is right now, out of the reach of floods, increasing roads, and a lack of foundations.

In this blog, we’ll walk you through the complete step-by-step process used by experts like ARBR House Lifting Service to lift homes safely, efficiently, and cost-effectively in India.

What Is House Lifting?

House lifting (also known as home elevation) is the process of raising an existing building from its foundation to a higher level using hydraulic jacks and supporting beams. The gap created between the old and new height is then filled with a stronger, more stable foundation.

It’s a highly engineered process — one that allows homeowners to protect their homes without reconstruction.

Step 1: Site Inspection & Feasibility Study

Before starting any lifting work, the first and most crucial step is a site inspection. ARBR’s expert engineers visit your property to analyze:

1. The soil condition and type of foundation

2. The age and structure of the building

3. The surrounding area (space for equipment, slope, road level)

4. Any damages or cracks already present

This step ensures the structure is safe to lift and helps decide the best lifting method.

Step 2: Planning & Designing the Lifting Strategy

Every home is unique, so the lifting plan must be customized.

Engineers design a detailed plan that includes:

1. The lifting height required (for example, 3 feet, 5 feet, or more)

2. Number and placement of hydraulic jacks

3. Structural reinforcements to prevent cracks or tilting

4. The sequence of lifting (which side first, how much per stage)

A solid plan ensures maximum safety and smooth execution throughout the process.

Step 3: Foundation Preparation

Once the plan is ready, the site team prepares the building for the lift:

1. Disconnect utilities like water, gas, and electricity lines safely.

2. Removes tiles, steps, or small extensions that may interfere.

3. Creates openings under the house walls or foundation beams for steel or wooden support beams.

This stage ensures your house can be lifted evenly without structural stress.

Step 4: Installation of Hydraulic Jacks & Support Beams

This is where the real work begins.

Hydraulic jacks are heavy-duty and are installed at strategic positions under the structure and linked with steel beams. Such jacks are coordinated in such a way that the house can be raised step-by-step and evenly. The jacks are capable of lifting several tons of weight, so that your whole house will go up, inch by inch, without checking or hanging in the balance.

ARBR’s team uses modern jack systems that are computer-monitored for perfect alignment throughout the process.

Step 5: Lifting the House

Once all systems are checked, the actual lifting begins.

Lifting is accomplished in stages, usually 2 to 6 inches each time. The balance, alignment, and structural integrity of the team are checked after every lift, and proceed with the process. The lifting may take a couple of weeks or a few days, depending on the size and type of house.

During this phase, constant monitoring ensures zero structural damage.

Step 6: Building the New Foundation

After the house reaches the desired height, a new and stronger foundation is built beneath it.

This includes:

1. Filling the new gap with bricks, concrete, or RCC

2. Reinforcing with steel bars

3. Ensuring proper curing and leveling before settling the house

The new base not only raises the house but also strengthens it for decades to come.

Step 7: Lowering and Final Fixing

Once the new foundation is complete and fully cured, the structure is slowly lowered onto it with precision.

The hydraulic jacks are gradually released, and all the support beams are carefully removed. The final alignment is checked using laser and leveling tools to ensure the house sits perfectly straight.

Step 8: Plumbing, Electrical & Finishing Work

After the lifting and foundation work are complete, it’s time to reconnect and fix everything:

1. Reconnect water, drainage, and electrical lines

2. Rebuild stairs, doors, and boundary walls to match the new height

3. Apply finishing touches like plastering, painting, and tiling

Once done, your home looks the same as before — just stronger and safer.

Step 9: Cost and Time Factors

The cost of house lifting in India depends on various factors:

1. Size and structure of the house

2. Lifting height (in feet)

3. Soil and foundation condition

4. Materials and technology used

Step 10: Final Inspection and Handover

The ARBR team performs a final safety check before handover and makes sure that the plumbing, structure, and foundation are in good condition.

The lot is cleared, the utilities reinstated, and the property is returned to you several units higher, secure and prepared to withstand many years to come.

Why Choose ARBR House Lifting Service?

1. 10+ Years of Expertise in house lifting across India

2. Advanced Hydraulic Technology for safe and precise lifting

3. No Damage Guarantee to walls or structure

4. Affordable Pricing with complete transparency

5. Experienced Structural Engineers supervise every project

With ARBR, you’re not just lifting a building — you’re lifting your home’s safety, value, and future.

Final Thoughts

House lifting is no longer a risky or expensive process.
With the right experts, you can protect your home from floods, road height increases, and foundation damage — without rebuilding. If you’re considering this solution, talk to the professionals at ARBR House Lifting Service today for a free consultation.